Keg tap hook up

How to tap a keg?

Before tapping a keg make sure you have the right keg coupler to tap a keg. More than likely you will because the distributor supplies retailers with the right coupler for the keg they are pouring. If you are using a party pump coupler that will be provided by the distributor as well.

How do you use a keg coupler?

Turn the keg coupler handle 1/4 turn clockwise; the coupler is now secured to keg. Pull out on the coupler handle and push down; release the handle and it will lock into place. The keg is now tapped. Tapping the keg properly will activate both the beer and the CO2 pressure line.

How do you connect a gas kegerator to a beer line?

Connect Beer and Gas Lines Youll need two lines to set up your kegerator - the beer line and the gas line. The beer line connects to the keg by way of the keg coupler and delivers cold beer to the tap faucet. The gas line connects to the CO2 regulator on the CO2 tank, then also connects to the keg coupler.

What do I need to set up a kegerator?

Youll need two lines to set up your kegerator - the beer line and the gas line. The beer line connects to the keg by way of the keg coupler and delivers cold beer to the tap faucet. The gas line connects to the CO2 regulator on the CO2 tank, then also connects to the keg coupler.

How do you put a tap in a keg?

Step 1: Insert the tap into the opening at the top of the keg. Step 2: Make sure the notches are lined up and push the tap in. DO NOT lower the lever! Step 3: Turn the tap clockwise until it locks while keeping the lever up.

How to open a keg with a kegerator?

by Kegerators.com Step 1: Insert the tap into the opening at the top of the keg. Step 2: Make sure the notches are lined up and push the tap in. DO NOT lower the lever! Step 3: Turn the tap clockwise until it locks while keeping the lever up. Step 4: Once the tap has seated properly, press down the levers to open the keg up.

What temperature should a keg be before tapping?

Before you tap the keg you want to make sure your keg or beer is at the right temperature for dispensing. If the beer or keg is warm. When you tap the keg you will pour foamy beer. The ideal temp is 38 degrees. Typically its nice to let a keg rest in a beer cooler for 24 hrs before tapping it. So that its at temperature.

Do you have to tip a keg?

In that case, you would just have to tip the keg so the tap is at a point below the level of the drink. Be aware, however, that beer or lager in kegs is usually carbonated by the pumping system, so expect your drink to be flat (or invest in a cheap tap with mini CO2 cylinders).

How to assemble a kegerator step by step?

Step-by-Step Instructions for Assembling Your Kegerator. 1 1. Install Caster Wheels. Before beginning, make sure the unit is empty – including the white metal keg floor (11). Then, carefully tip the beer ... 2 2. Remove Plug. 3 3. Install Tower. 4 4. Secure Tower. 5 5. Install Railing. More items

What temperature should a kegerator be set at?

Depending on the kegerator model you will want to set your kegerator to reach temperatures between 34 and 38 degrees F. Most kegerators on the market today provide an auto-defrost feature which should keep the unit from freezing up, but you will want to watch how your kegerator reacts to certain temperature levels.

How do you install a draft tower on a kegerator?

To install the draft tower, line up the circular gasket holes to the screw holes on top of the kegerator fridge. Feed the vinyl beer line all the way through the opening, and then screw in the tower screws through the gasket and holes atop the keg fridge. Step 3: Attach tap faucet.

Can you turn an old refrigerator into a keg?

If you bought a kegerator, all you need to do to tap your keg is supply a full keg of beer and fill the CO2 tank. However, if you are wanting to convert an old refrigerator or freezer into a kegerator, you may need a couple of components.