Need to hook up my surround sound

How do you hook up a surround sound to a TV?

Plug the white and red audio plugs into the cable box’s corresponding audio outputs, then the other ends into the receiver’s audio inputs that are linked with the visual inputs used in step 2. Connect a second pair of component video wires from the surround sound receiver’s video output jacks to the TV’s video input ports on the rear.

How to set up a surround sound system?

Each surround sound system will have a slightly different set of instructions detailing the best way to set it up. While you can follow general instructions to get decent sound out of your speakers, the best way to optimize them for perfect sound is by reading their manual first. Turn off and unplug your TV.

Do you have to buy a receiver separately for surround sound?

If you bought your surround sound set second-hand, you may have to buy the receiver separately. All speakers will connect to your receiver via AV cable, but the receiver can use optical, HDMI, or AV cables to connect to your TV. Make sure that your receivers audio input matches your preferred audio output on your TV.

How do I hook up raw speaker wire to surround sound?

Most new gen surround systems have specific ports that you can plug in the appropriate connector into. If your sound system is old, you might have clips that you can place your raw speaker wire into.

How do you hook up surround sound speakers to a TV?

Connecting the Speakers Place your receiver near your TV. The receiver must be close enough to both the TV and a power source that you can adequately plug it into both. Examine how your speakers connect. Most surround sound systems have ports for each speaker that you simply plug the appropriate connector into.

How do I get sound from my TV to my soundbar?

A better option for sending audio from your TV to an external audio system is the digital optical audio output connection. Connect a digital optical cable to the digital optical output on your TV. Connect the other end of the cable to a corresponding digital optical input on a soundbar, home-theater-in-a-box system, or home theater receiver.

How do I get surround sound from my HDMI output?

Devices that use HDMI input as their audio output include gaming consoles, DVD players and cable boxes. To reroute the sound, plug the devices into the receiver to channel their output into the surround sound. You will need additional cables to attach the receiver to the appropriate HDMI inputs.

Can you connect a TV to an external audio system?

Connect Your TV To An External Audio System A better alternative to a TVs internal speakers is to connect the set to an external sound system. With very rare exceptions, you cant connect a TV directly to standard speakers.

So do you need a receiver for surround sound? For traditional speakers, a receiver is highly recommended, almost always required. For active Soundbars with wireless or satellite speakers, a receiver is not needed. Passive Soundbars will require the use of a receiver.

Do you need an AV receiver for a soundbar?

How do you hook up surround sound speakers?

Most surround sound systems have ports for each speaker that you simply plug the appropriate connector into. Some older systems have clips that you plug bare speaker wire into. To accomplish this, youll need to strip some of the wire away with wire cutters and then clip them into place on the back of the speaker. 3

What cables do I need for a surround sound system?

At the very least you will need one of those cables (HDMI, Toslink, RCA) to make that audio connection between the SOURCE and the AMPLIFIER and we will describe each of them below. In addition you will need speaker wires for wiring your surround sound system speakers to your amplifier.

How do you connect speaker wire to subwoofer post?

Steps for connecting speaker wire to binding post terminals on subwoofers: Strip the speaker wire to about 3/8″ to 1/2″ length bare wire. Twist the wire tightly by hand to keep the wire strands together. Push one of the terminals to open the hole. Insert the bare wire up to the insulation.

How to connect speaker wire to receiver or amplifier?

In most cases, a home stereo receiver or amplifier allows connecting speaker wire using the binding posts and/or banana plug jacks. How to connect speaker wire to receivers or amplifier with binding posts You can easily connect speaker wire to most amplifiers or receivers pretty easily.