Where to hook up jumper cables on a prius

How do you jump start a Toyota Prius with jumper cables?

Clip the positive lead of the jumper cables to the jump starting terminal on your Toyota Prius. Connect the other positive lead to the positive battery terminal of the assisting vehicle or to the positive terminal of the Quick-kick unit that will be providing auxiliary power.

Where are the battery cables hooked up on a Prius?

“Prius battery cables hooked up. (These terminals are in the front for the 12V starter battery in the back.)” In case you wondered earlier how I remembered the exact date of my previous battery breakdown, the date was in the metadata, as you can see here.

How do you hook up jumper cables to a dead battery?

To hook up jumper cables, park the donor vehicle next to the vehicle with the dead battery, turn both vehicles off, and set the parking brakes. Next, clamp one of the red clamps onto the positive terminal of the dead battery, then secure the other red clamp to the positive terminal on the donor battery.

How do you use jumper cables to jump start a car?

Connect the negative lead of your jumper cables to the negative terminal of the car providing the jump. Connect the other negative lead to a solid, unpainted piece of metal that is not near moving parts or the jump start terminal. Start the vehicle providing the jump and let it run for five minutes.

How do you jump start a hybrid Prius?

The Short Version of How to Jump Start a Hybrid. Open the hood and find the fuse block cover — there should be a jump start terminal under it. Connect the positive lead of your jumper cables to the positive terminal of your Prius, and the other positive lead to the corresponding terminal of the car providing the jump.

How do you use jumper cables to jump start a car?

Connect the negative lead of your jumper cables to the negative terminal of the car providing the jump. Connect the other negative lead to a solid, unpainted piece of metal that is not near moving parts or the jump start terminal. Start the vehicle providing the jump and let it run for five minutes.

How do I charge a dead battery in a Prius?

When Prius is turned on, the accessory battery is getting charged from the DC/DC converter. All you need to do at this point is hook the battery cables from the Prius onto the terminals of the dead battery in the other vehicle.

What should I do if my Prius wont start?

If you get into your Prius, turn the key, and your car doesnt start (you may hear nothing or a clicking sound from the engine bay), you have a dead battery and need a jump-start. Check to see if you left your headlights or an interior light on and turn the switch off.

Where can I get a jump start cable for my car?

You can find cables in auto parts stores, at gas stations or just about anywhere you buy car parts. STEP 2: Park the car that needs to be jump-started next to a car with a good battery. Park the car with the good battery next to the car with the dead battery.

What do you need to jump start a car?

You’ll need another car and a pair of jumper cables, or a portable jump starter. This only takes a few minutes to set up, but you’ll want to carefully follow a few specific steps to stay safe. It’s always a good idea to have jumper cables and an emergency kit or battery booster in your vehicle in case you have a problem.

How do you remove jumper cables from a car?

Disconnect the jumper cables in reverse, starting with the black clamps. Remove the cables in the exact opposite order from earlier. Start with the negative grounding cable you attached to a metal component. Remove the black clamp, followed by the red clamp, on the donor battery.

How do you jump start a car with two batteries?

Step 1: Before you attempt to jump start the car, make sure both batteries are of similar voltage or you risk damaging electrical components. Step 2: Get the cars as close together as possible but do not allow the cars to touch one another. Step 3: With both cars off and in park, connect the jumper cables in the following order: