How to properly hook up sway bars

How to install a sway bar?

1 Get the right sway bar for your vehicle. There are loads to choose from, and they differ in terms of particular hitches and weights. 2 Get in your car and go on a test drive at normal speeds. Pay attention to the trailer so that you can locate where the tension screws are. ... 3 Choose the location for installation. ... More items...

Do you need sway bars for travel trailers?

Travel Trailer Sway Bar Noise Tip 1: One of the first things you need to do is get a set of sway bars that fit your trailer. Not all sway bars are made the same and some do not work with those trailers that have surge brakes. The sway bars work on specific hitches and weight limits only.

Are all sway bars made the same?

Not all sway bars are made the same and some do not work with those trailers that have surge brakes. The sway bars work on specific hitches and weight limits only. Tip 2: Do a fully loaded test drive at normal towing speeds.

How do I adjust the sway bar tension?

The sway bars work on specific hitches and weight limits only. Tip 2: Do a fully loaded test drive at normal towing speeds. Monitor your trailers actions and when you stop, you need to locate the tension screws. Once you have done that, you can turn the ¼ to increase or decrease the tension.

How to install sway bar links on a car?

Installing New Sway Bar Links 1 Position the new sway bar links in place. ... 2 Use the two wrenches and your helper again to install the new sway bar link. 3 Tighten down on the links, one at a time. ... 4 Continue to tighten down on both sides until the rubber seals are about two-thirds compressed. ...

How to install an anti sway bar on a travel trailer?

Travel Trailer Anti-Sway bar Installation Tips 1 Raise your vehicle-make sure to get it high enough off the ground to work safely on it. 2 Now you remove the end links. 3 Next, you need to remove the 2 supporting bolts holding the muffler to your car. ... 4 Next, remove the bolts holding the sway bar bushing strap. ... More items...

How do you remove a sway bar from a car?

Often the sway bar will hit various components before you can thoroughly remove it. Remove one side at a time and pull the sway bar out of the wheel well. Since the sway bar is typically u-shaped, you won’t be able to pull it straight out. After successfully removing the sway bar, you can replace the bushings or simply replace the entire sway bar.

How much torque do you put on a front sway bar?

Attach the front end links and put the bushing brace back on. 40 and 55 pounds of torque, respectively. Tip 4: when it is icy, snowing or you are in heavy rain, you need to remove the sway bar.

How do I adjust the sway bar on my trailer?

The sway bars should come with adjustment screws that need a little turn, either way, to make sure you have the right tension on your trailer. To make sure you know which way to turn those screws, you should do a test drive with your tow vehicle and your trailer filled with the same weight you will have on your trip.

How do I adjust the tension on my rear sway control?

The handle is actually the on/off switch for the unit and the bolt under the handle is the tension adjustment bolt. You will need to turn the On/Off handle clockwise (tighter) until the handle will stay firmly in place parallel with the main body of the sway control.

How tight to make a friction sway control unit?

You wont see too much information on how tight to make a bar style friction sway control unit because it will be different for every situation. You would make it about as tight as you think it needs to be and then tow the trailer to see if it needs to be tighter or looser.

What does the sway bar adjustment do?

Sway Bar Adjustment. Here is a look at how different adjustments affect the suspension as a whole. Soft Front Bar. Increases front traction of the car while decreasing the rear traction. Increases the roll of the car. Under steers the vehicle.