How do you hook up a sand filter to an intex pool

How do you set up an Intex saltwater pool filter?

Setting Up Your Intex Saltwater Filter System. Turn on the machine. Plug the power cord into an electrical outlet. And turn on the unit. With the filter pump turned on and operating. Set the operating hours for your saltwater system. Each pool size has different required operating hours. You can refer to your Intex pool pump manual for this one.

How do you connect a sand filter to a pool pump?

Place the filter next to pump. Before you connect the pool sand filter into the piping system, you have to assemble the filter. First, screw the pressure gauge to the 1/4 hole on the side of the filter. If the threads arent prepared, wrap them with two layers of Teflon tape.

What is the best Intex pool pump?

The most powerful Intex pump is the Krystal Clear Sand Filter Pump & Saltwater System CG-26679 that can easily serve a 15,000-gallon pool. The pump flow rate is 2,650 gallons per hour. And It has a sand capacity of 120 lbs.

How to install an above ground swimming pool filter?

Make sure that your water inlet hose connection in facing your above ground pool. Put No.20 silica sand or glass sand (with particle size of 0.45-0.85 mm) into your tank. Make sure you place the sand shield over the top of your filter’s center pipe. You must only fill it halfway. And to evenly distribute the sand inside the tank.

How do you use the Intex saltwater system?

How to Use the Intex Saltwater System. Add one 25-pound bag of salt for every 1,000 gallons of water. Do not use yellow or iodine salt. Go to a pool supply company, and get salt for the pool. If youre converting your pool from a chlorine-treated pool to a salt water pool, wait two days, so the chlorine dissipates.

How do I install the Intex filter pump?

The Intex filter pump is very easy to install. Everything is included. Before filling the pool with water, first insert the water outlet and inlet Then hook up the hoses. There is a simple rule: the upper connection points of the pool an the pump are for water suction, both lower connections are pumping the water back into the pool.

How do you change a sand filter on an Intex pool?

At least two people should work on your Intex pool pump setup. Remove the sand filter and its accessories from the packaging carefully and inspect for any visible damage. Unscrew the leaf trap cover in a counter-clockwise motion in the pre-filter housing. Take out the basket and filter housing nut.

What is the best Intex pool pump?

The most powerful Intex pump is the Krystal Clear Sand Filter Pump & Saltwater System CG-26679 that can easily serve a 15,000-gallon pool. The pump flow rate is 2,650 gallons per hour. And It has a sand capacity of 120 lbs.

We recommend this pack of 6. The 1500 GPH Krystal Clear cartridge filter pump is the best Pump if you own a 16′ or 18′ Easy Set or Metal Frame Intex pool. Thinking about converting your Intex pool into a saltwater system?

Do I need to top up my Intex pool?

How to install an above ground pool pump and filter?

How to Install an Above Ground Pool Pump & Filter. 1 Step 1. Measure the area needed for the pump and filter to sit on. Within a couple feet of the skimmer in the pool, measure out the area for the pump ... 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5.

How does an above ground pool filter work?

A properly functioning above-ground pool filter is a vital element for the cleanliness of your swimming pool. It works in concert with the pump and chemical water treatment, to ensure the pool is always clean and free from unsightly and harmful particles, minerals and bacteria.

How do you hook up an air filter to a pool?

Connect a hose to the air filter intake valve to the outflow pipe from the pool. Water leaves the pool and enters the filter to be cleaned. Attach the second flex hose to the output valve on the filter, and join it to the intake pipe of the pool.

How to fill the pool properly?

Fill the Pool 1 Always fill the water slowly. 2 Fill it halfway first, and read the manual to install the equipment like skimmer of the pool. 3 Install the pool filter and pump. 4 Fill the pool again until the water reaches the recommended level. More ...