Hook up 2 way light switch

How do you connect a light switch to a switch?

The wire connection is completed inside the switch electrical box. There is another wire connector securing the 14/3 white wire to the 14/2 white wire of the light cable. Again, this wire connection is completed inside the UP Switch electrical box. The 14/3 cable connects the 2 switches.

What is a 2 way switch on a lamp?

2 way switching means having two or more switches in different locations to control one lamp. They are wired so that operation of either switch will control the light. This arrangement is often found in stairways, with one switch upstairs and one switch downstairs or in long hallways with a switch at either end.

How do I connect the up switch to the electrical box?

The wire connection is completed inside the switch electrical box. There is another wire connector securing the 14/3 white wire to the 14/2 white wire of the light cable. Again, this wire connection is completed inside the UP Switch electrical box.

How to make 2-way switching connection?

There are two methods of making 2-way switching connection one is 2-wire control and another is 3-wire control. We have explained both the methods below and both the methods are demonstrated in the Video given at the end of this article.

How to wire a light switch?

Basic Knowledge of How to Wire a Light Switch 1 Black Wire – This is the hot or load wire 2 White Wire – This is the neutral wire 3 Bare Copper (Green) Wire – This is your ground wire 4 Red Wire – This wire is used for 3 or 4 way switches and will connect the switches together so they can each control your lights.

How do you pigtail a light switch?

The pigtail gives you two hot wires instead of just one. Connect one wire to the first switch in the box and the second wire to the other switch, and connect the black wire from each of the lights to the other terminal on its respective switch.

What is the purpose of the switch on a light switch?

The switch serves to cut the power from reaching the light switch. The white or neutral wire bypasses the switch and goes straight to your lights. This wire is needed to complete the circuit.

What does the Red Wire connect to on a light switch?

The red wire connects one set of brass terminals on the two switches, and the black wire connects the other set. The bottom terminal on one of the switches is used for the black wire coming from the power source, and on the other switch, it connects to the black wire going to the light.

How to wire a two way switch from two locations?

To switch from two locations youll need 2 two way switches and. wire them together in a particular way. A two way switch has 3 terminals. A common(C), L1 and L2. If you look inside an existing wired in two way switch you will see quite a few wires of differing colours. This can be confusing.

What is two way light switch?

Two way light switch means controlling single light or electric device by using two different switches from different locations. Here each switch will have common terminal, L1 and L2 (L = Line terminal). By using electrical wire 2 switch terminals are connected. Here after electrical circuit completes when both two switch ON or two switch OFF.

How to connect more than two switches to a circuit?

If more than two switches are needed for light control, one should use a three way light switch. Such circuit involves two external switches and one three way light switch between them. How to connect a two way switch? Connecting any switch - a two way switch as well - is not a difficult task, although one needs to follow certain rules.

How does a multi way switch work?

Each switch - one or multiple way, operates based on similar principle. To turn on the light, one has to move the switch, that is - close the electric circuit. Analogically, moving the switch back off cuts the circuit and the electricity stops flowing - the light goes off.