Two way switch hook up

two way switch hook up

How do you wire a 2 way switch?

2 way switch connection Circuit – 3: Common L1, L2 Connect the live wire with the terminal L1 in switch1 and join L1 terminal of switch1 and L1 terminal of the switch2. Run the wire between the terminal L2 of switch1 to terminal L2 to switch2. Connect the black cable from between the two common terminals of switch1 and switch2.

How do I connect two light fittings to one switch?

Connect the black cable from between the two common terminals of switch1 and switch2. Finally run the blue wire from terminal L2 of switch1 from to light fitting.

How many terminals does a two way switch have?

A two way switch has 3 terminals. A common (C), L1 and L2 If you look inside an existing wired in two way switch you will see quite a few wires of differing colours.

How does 2 way light switching work?

2 way light switching works by keeping two wires between two different switches. This is what both wires do. So this wire acts as an alternate bridge point between the two switches. Which allows them to connect the circuit to the light source from either switch. 3.

How does a two way switch work?

Two way switching allows you to control a light from two locations. This is very useful in a number places, particularly hallways and stairs To switch from two locations youll need 2 two way switches and wire them together in a particular way. A two way switch has 3 terminals. A common (C), L1 and L2

How do you wire a 2 way light switch?

You have an incoming hot wire (black) going to one screw (it does not matter if you use the brass or silver screw) on the side of the 2-way switch and a black wire from the other screw on the 2-way switch going to the load (light, ceiling fan etc..). The white wires are wire nutted together so they can continue the circuit.

How do I connect the up switch to the electrical box?

The wire connection is completed inside the switch electrical box. There is another wire connector securing the 14/3 white wire to the 14/2 white wire of the light cable. Again, this wire connection is completed inside the UP Switch electrical box.

What are the ground wires on a 2 way switch?

The Green screw on the 2-way switch is for the ground so all ground wires should be connected as seen below. All ground wires (bare copper) are all now connected (incoming ground, load ground and switch ground). This makes for a safe protected circuit by having all grounds intact. So what have we accomplished.

How do you wire a two way light switch to a common?

This is a basic on-off light switch. Now to wire a two-way switch, you will need to bring your common into one switch and terminate. Take your neutral (blue) wire to the common on your next switch and terminate. You will have two terminals on the base of each switch connecting terminals 1 to 1 and 2 to 2.

How does a 2 way switch work?

The 2 way switch or single pole double throw switch is a three terminal switch. Here 1 terminal is the input and the other two are used as outputs. It’s okay if this is too complex for you. We’ll break it down pretty soon.

Where does the power wire connect to a light switch?

The power white wire does not connect to the switch at all but is connected to the white wire of the 14/3 cable. The wire connection is completed inside the switch electrical box. There is another wire connector securing the 14/3 white wire to the 14/2 white wire of the light cable.

Does the switch turn the light on or off?

Either switch can turn the light on or off. Circuit wiring is very similar in the European Union and North America but there are some differences. Electrical power supply wire insulation colors are different. In this article, we will be referring to North America cables and wire colors.

Related posts: