Dating elna sewing machines

Do they still make Elna sewing machines?

Over the years, Elna markets a number of quite extraordinary sewing machines models. All Elna models, including the modern machines still sold today, have Swiss designs. Many vintage Elna models also had groundbreaking features that made them stand out from other sewing machines at the time.

Should I buy a Janome Elna?

I’ve worked on many Janome industrial sewing machines and when compared to a vintage Elna, it felt just the same. The advantage of a domestic Elna is they are smaller and cost less than industrial sewing machines, yet do the same thing. Buy an Elna because the domestic models feel like industrial sewing machines.

Is it worth buying an Elna 2007?

Or, don’t buy an Elna 2007! I am still snowed in here, so what better way to pass some time than to have a good, long moan about my sewing machine, an Elna 2007. My first machine was an old Singer made in the 60s which had a lot of use and was not worth the price it would cost to repair.

How can I tell what year my Elna was made?

To get an exact date on a vintage Elna, all you have to do is look at the serial number. Before 1963, the first digit in the serial number was the year in which the machine was made. For the years 1963 to 1982 just click this link to see where your machine may lie. The key is in the letter in the serial number.

Where are Elna sewing machines made?

Modern Elna sewing machines still have their roots in Switzerland, where new designs are created. However, all production takes place in several East Asian countries rather than at a Swiss factory. Of course, like most modern machines, new Elna machines do not contain solid metal parts anymore.

How can I tell how old my Elna sewing machine is?

In 1981 the company made a change in its serial number and now the first 2 digits indicate the week and the letter the year the machine was made. After the last year on that chart, you should check with Elna to find out how old your machine is. Do they Still Make Elna Sewing Machines?

What is the difference between Janome and Elna sewing machines?

For Elnas and Janome’s that use the 7mm and the 9mm stitch, those are the only ones that use Janome presser feet. There really is little to compare after 2004. The Elna machines were made by Janome so they are basically Janome machines in the Elna suit of clothes. In other words, there are a few differences between the machines.

Why did Janome buy out Elna?

This company bought out Elna in 2006 after a 2-year partnership. The reason for this turn of events was that Janome wanted access to European engineering and technology. This move was very beneficial to their own brand of sewing machines as well as kept the sewing machine market with different types of machines.

How can I tell how old my Elna sewing machine is?

In 1981 the company made a change in its serial number and now the first 2 digits indicate the week and the letter the year the machine was made. After the last year on that chart, you should check with Elna to find out how old your machine is. Do they Still Make Elna Sewing Machines?

Where do I find the serial number on my Elna?

The serial numbers on the early Elnas, pre Star Series, were found stamped on the inside of the casting to the right of the thread take up slot. This is easily seen when the hinged face plate is opened; to open fully it is necessary to lower the presser bar lever.

What was the model number of the Elna?

ELNA MODELS PRODUCED 1940 – 1952 Elna 1 Whilst the first Elna was not given a model number as such, it became known as the Elna 1, it is also known affectionately as the Grasshopper. Such was the soundness of its original design that only minor modifications were made during its production life.

What do the first two digits mean on Elnas?

The first two digits would indicate the week of production. Y32 at the beginning of the serial number would indicate the 32nd week of 1981. The serial numbers on the early Elnas, pre Star Series, were found stamped on the inside of the casting to the right of the thread take up slot.