Ecobee humidifier hookup

How to wire a humidifier to an ecobee?

Hence, it is recommendable for safety reasons that you have both the humidifier and the ecobee off during the wiring process. After powering off the humidifier, locate the wires that were previously connecting the fan and water valve. The RC, G, Y1, and W1 wires should be wired according to the version of the ecobee.

Does ecobee3 smart thermostat work with humidifiers?

Specifically, the ecobee3 smart thermostat is compatible with most HVAC devices, hence can work with most humidifiers. Further, to have the ecobee faultlessly working with the humidifier, you need first to wire them and then configure the humidifier into the ecobee just like any other equipment.

Can I plug my ecobee into my existing HVAC system?

Your ecobee is a very intelligent brain that you can plug into your existing HVAC system. The ecobee comes packed with features that can min/max your ability to control your home, but if your HVAC system is outdated or flagging it will naturally limit what your ecobee is capable of.

Does ecobee 3 Lite work with other devices?

Keeping aside the fact that ecobee 3 lite cannot control humidifiers, dehumidifiers, and ventilators, it is seamlessly compatible with most other devices. Below is a comparison table between ecobee 3lite and ecobee smart-thermostat (ecobee 5)

Can I use a manual humidifier with an ecobee?

You would need to put a manual humidistat inline with one wire. If you want to use your Ecobee to control the humidity it needs a one wire connection. You could use the Y wire if you switch it over at the beginning and end of the season.

How do I hook up a humidifier to a thermostat?

You will need two wires between the humidifier and the thermostat. You need to have the thermostat installed and programmed for two wire control (ACC+ and ACC-) before powering up the humidifier transformer. If you only have one spare wire then youll need to use a relay.

What wire do I need to power the humidifier?

You need to have the thermostat installed and programmed for two wire control (ACC+ and ACC-) before powering up the humidifier transformer. If you only have one spare wire then youll need to use a relay.

Is there a wiring diagram for the Ecobee4 thermostat?

The following wiring diagrams are for the ecobee4 thermostat and common HVAC equipment configurations. HUMIDIFIER/DEHUMIDIFIER 1-WIRE SETUP. My diagram shows using Rc. although either should work.

What is the difference between ecobee3 and ecobee3 lite?

So Ecobee came with a lighter version, Ecobee3 Lite, that was almost identical to the Ecobee3, except for a few features. The Ecobee3 Lite thermostat is compatible with almost everything. It has a smart recovery mode, supports two-stage heating and cooling, and is compatible with most HVAC systems. But one thing that it lacks is a smart sensor.

How do I monitor and make changes to my ecobee3 lite?

The company gives you a variety of ways to monitor and make changes to your Ecobee3 Lite. You can control your homes temperature with a tap, either on the thermostat itself -- or through the Ecobee app.

What smart thermostats work with ecobee3 lite?

Of all the smart thermostats, the Ecobee3 Lite is one of the most compatible devices and works with Amazon Echo, Google Home, Apple HomeKit, Samsung SmartThings, IFTTT, Wink, and Control4 systems.

Does the ecobee Lite work with Alexa?

Therefore, the Ecobee Lite must be programmed into the home’s overarching smart home system for voice control to work. However, once set up, the Ecobee Lite can be integrated with other Alexa-controlled devices and used to place calls, respond to texts, and listen to music—features that are automatically built into the standard model.