Hook up projector to surround sound

hook up projector to surround sound

How to connect a sound system to a projector?

How to connect your sound system to your projector. Turn your amplifier or receiver off to avoid it transmitting the sounds while you are connecting. Place the cable in the audio out port. Insert the ends of the audio cable to the sound system to amplifier the sound they produce. After connecting to the receiver, turn it on.

What cables do I need to hook up a projector to receiver?

2) HDMI cable from Receiver to Projector. 3) Speaker wire from Receiver to each left and right fronts, left and right backs and center speaker. 4) 120volt power at sub woofer and cable from sub woofer to receiver. ( What type of cable is needed from sub to receiver?)

How do you hook up a surround sound to a TV?

Plug the white and red audio plugs into the cable box’s corresponding audio outputs, then the other ends into the receiver’s audio inputs that are linked with the visual inputs used in step 2. Connect a second pair of component video wires from the surround sound receiver’s video output jacks to the TV’s video input ports on the rear.

How do I connect my AVR to my projector?

Turn Off, Connect, and Turn On: Turn off both devices first. Plug the audio cables into the sound port or “Audio Out” on your projector. Insert the audio cables’ other connectors into the “Aux-In” port on the rear end of the AVR. Now you can turn on both devices. Press The Source Button: The AVR has a “Source” button.

Can you connect a projector to a different audio device?

You can have the sound come out from both your projector speaker and through your HDTV that’s connected to a cable box or BD player. At any rate, here are the different ways you can connect your projector to different audio devices.

How do I hook up my soundbar to my projector?

Heres how you should hook them up: 1 With the devices off, connect your HDMI cable into the HDMI/HDMI ARC port on your projector. 2 Plug the other end of the HDMI cable to the HDMI/HDMI ARC port on your soundbar. 3 Turn both devices on. 4 Ensure both devices are set to the HDMI channels that you connected to.

How do I connect my AVR to my projector?

Turn Off, Connect, and Turn On: Turn off both devices first. Plug the audio cables into the sound port or “Audio Out” on your projector. Insert the audio cables’ other connectors into the “Aux-In” port on the rear end of the AVR. Now you can turn on both devices. Press The Source Button: The AVR has a “Source” button.

How does a projector work?

To make this possible, the projector is connected to an amplifier which turns the input signal (usually from a DVD player) into an amplified sound that can be heard over other sounds. The image light will shine through lenses and then through a device called a lens.

How do I connect my Philips AVR to my projector?

Plug the audio cables into the sound port or “Audio Out” on your projector. Insert the audio cables’ other connectors into the “Aux-In” port on the rear end of the AVR. Now you can turn on both devices. Press The Source Button: The AVR has a “Source” button. Press it until the “Aux” word appears on the control panel.

How to connect a sound system to a projector?

How to connect your sound system to your projector. Turn your amplifier or receiver off to avoid it transmitting the sounds while you are connecting. Place the cable in the audio out port. Insert the ends of the audio cable to the sound system to amplifier the sound they produce. After connecting to the receiver, turn it on.

How does an AV receiver work?

An AV receiver (or called an AVR) is simply an electronic component used to receive video and audio signals from multiple sources. The AVR processes and amplifies the signal to drive loudspeakers while routing the video signals to display on projectors. However, before you make any connection, turn off the devices.

What are the different audio connection interfaces on projectors?

Different Audio Connection Interfaces on Projectors. 1 1. Composite or Component Audio. These include stereo audio. It has a plug for the left and right speakers. You can identify the connectors, which are ... 2 2. TOSLINK or Optical. 3 3. Bluetooth. 4 4. 3.5 mm audio jack.

Related posts: