Hook up drums

How do I connect my drum module to my amp?

All you need is a ¼ inch cable that will connect the “direct out” of the drum module to the amplifier input. The “direct out” is on the back of your drum module. You can do the connection using the L Mono or both L and R if your amplifier supports it.

What makes a good drum sound?

Capturing the room, the space around the drums, is often critical to getting a good drum sound, because it can be the glue that holds all the disparate multi-miked tracks together. A pair of mics that is positioned 4 feet in front of the kit and about 2 feet above the floor can give a great overall sonic picture of the totality of the kit.

How should I Set my mounted tom drums?

Setting the mounted toms at too steep an angle is a common mistake beginning drummers make, and all it does is ensure you wear out drumheads faster and don’t get the optimum rebound off the head. Set the drums so you can hit them at the correct angle and height without raising or lowering your arm, shoulder, or wrist in some unnatural way.

How to connect headphones to an electronic drum set?

Every electronic drum kit should have a headphone port to connect headphones to and some in the market even provide free headphones in the set. However, one important thing to take note of is the auxiliary input on the module.

How do I connect my Drum amp to my amp?

Connecting drum amps is quite simple. All you need is a ¼ inch cable that will connect the “direct out” of the drum module to the amplifier input. The “direct out” is on the back of your drum module. You can do the connection using the L Mono or both L and R if your amplifier supports it.

How do I connect a drum module to an audio interface?

1 Connect two TRS cables from the Main Outs on your drum module’s back to two inputs of your interface. ... 2 Create a Stereo audio track and update the input routing to match the input (s) you’ve connected to your module. 3 Record-enable the audio track and press record.

How do I connect an electric drum to a PA system?

Purchase an electric drum amp or PA system. 2. Use a 1/4 inch cable to connect to the Audio Out port on the electric drum module. 3. Connect the other end of the 1/4 inch cable to the input on the amp or one of the channels on the PA mixer.

How do I record samples from my drum module to audio?

Follow these steps to record the samples from your module onto an audio track. Connect two TRS cables from the Main Outs on your drum module’s back to two inputs of your interface. If your interface only has one input, connect a cable from your drum module’s L output to the input on your interface.

How do I connect my drum set to my amp?

Find the module output jack on your drum set. Locate the drum module. This is the “brain” of the drum kit that allows you to alter the sounds, change the settings, and turn the kit on and off. Look around the module for a port labled Output, Audio Out, or similar. This is where you’ll connect the drum kit to the amp or PA system.

What size headphones do I need for electronic drumming?

If you think you’re going to want to use these headphones on both the electronic drum kit and also on the go with a smartphone or similar, then opt for a larger Ohms model. If, on the other hand, you plan on using these around the recording studio and with a lot of professional grade equipment, then chances are the 32 Ohms model will suit you best.

How do you connect a drum module to a PA system?

Connect your drum module to your speakers or PA system. Use long, ¼ inch cables or XLR cables. First, plug one end of the cable into the output jack of your drum set and the other end into the input jack of your amplifier or one of the channel inputs on the PA mixer.

Can a 200 watt receiver connect to an electronic drum module?

Can a 200 watt receiver with an auxiliary jack be connected to an electronic drum module? It depends on what type of drum set you have. Lower-end drum sets dont have as many features as higher-end drum sets.