Everything needed to hook up subs

How to hook up a subwoofer to a car?

Take your remote wire that came in your amp kit and splice/solder it onto that blue and white-striped wire and run it through the dash and then along the door jam. While you have the CD player removed, plug the RCA white and red plugs into the back of the deck where it says Subwoofer Output..

Do I need a subwoofer?

This article has been viewed 1,040,288 times. Learn more... If the music coming out of your sound system seems weak and unimpressive, you may need subwoofers. Subwoofers are speakers that play low-pitched sounds called bass and sub-bass. Wiring one into an existing system isn’t as tricky as it first seems.

How do you connect an amp to a subwoofer enclosure?

The amp should be set up next to or on top of the subwoofer enclosure. If it is separate from the subwoofers, it may have its own colored wires to connect to the ones on the stereo. Use more crimp connectors or solder the wires together as needed. Otherwise, use the existing cables to connect it to your sound system.

Can I use a cable tie for subwoofer?

Cable ties are very useful for securing wires or fuse holders to the sides of your vehicle. Thanks! Note that all vehicles have different wiring systems, so the steps you need to take to fit a subwoofer may vary slightly.

How to install a powered subwoofer in a car?

The powered subwoofer connects to the stereo in the same way as the standard amplifier. This process is straightforward, and most of the active woofers come equipped with all the necessary wires, so let’s start: Run power cable from the car battery to where the subwoofer will be installed.

Should you disconnect the car battery to connect a subwoofer?

By disconnecting the car battery, you can prevent it from losing voltage while you attempt to connect a subwoofer to the car’s stereo. In most cases, a car’s fuse box is in between the stereo and power supply.

What is the best subwoofer for a car stereo?

The most popular subwoofers which you can connect directly with the stereo are active subwoofers. My favorite is the thin but high-performing under-seat Rockford Fosgate PS-8 Punch, which you can install in nearly every car thanks to its height of barely 3.3″.

How do I connect my speakers to my car?

At each pair of speaker wires or near the speaker wire connector, strip off about 1/2″ of insulation and tap off it. To do so, either wrap wire or cut the factory wire and connect to it using crimp connectors while attaching a small gauge wire when doing so. Crimp connectors (see the tool list above) are reliable and make good electrical contact.

Can you connect a subwoofer to a receiver with regular speaker wire?

Using regular speaker wire to connect your subwoofer to a receiver will allow it to function properly. The only potential issue is that the cable could potentially pick up radio signals and output them via the subwoofer if it is not adequately shielded. Subwoofer cables are shielded, which prevents interference from tarnishing the output.

What is a subwoofer cable?

A “subwoofer” identifies a cable that connects an audio amplifier to a speaker and reproduces low-frequency sound signals.

Can you connect a subwoofer wire to an RCA cable?

As long as the receiver or amplifier caters for RCA connection, using subwoofer wire is possible. The design of the wire makes it a line-level, analog audio cable which can transmit low-end analog audio to connect to the line-level input of your stereo system.

How do you connect a subwoofer to an LFE cable?

Connect Using the LFE Subwoofer Output. The preferred method of connecting a subwoofer is through the Subwoofer Output (labeled as SUB OUT or SUBWOOFER) of a receiver using an LFE ( an acronym for Low-Frequency Effects) cable.